Toll Free: (866) 425-4693


SECCO Variable Speed Grinders

Large View


v30 Full Bullnose Profile and Polishing Kit

Item #v30vpolset

This is our new variable speed 4” wet polisher / grinder. This unit is equipped with an 800 watt 7 amp variable speed motor and features a variable speed wheel switch. This grinder is ideal for quick stock removal and exposing the aggregate with a diamond grinding wheel.

This unit has a quick connect, brass coupling for a 1/2” lego connector (included)and an adapter for use with a standard water hose. The grinder features a 5/8-11 UNC spindle thread, GFCI operator protector circuit breaker (integrated in cord ) and a 360° adjustable aluminum safety guard with integrated rubber splash skirt. Also included with this unit is a bail handle (D handle), wrench, extra carbon brushes and a water line.

At high speed, this is the ideal tool for fast stock removal using diamond grinding wheels, zero tolerance wheels, diamond edge profile wheels, finger bits and diamond hole saws.

Adjust to a lower speed for optimal polishing with diamond polishing pads.

This unit is manufactured by Hurricane, a division of Secco International USA and carries a full one year replacement warranty.

All replacement parts can be supplied by contacting us at 520-609-2307.

This kit includes a 1-1/4" half round (v30) vacuum brazed diamond profile wheel. This vacuum brazed profiler is designed to produce perfect half round bullnose on 1-1/4" natural or engineered stone, concrete, and tile. Very simple to use, just screw this tool onto our wet grinder. Our profile wheels feature an internal water feed for optimum cooling of the bit. A nylon guide on the top of the bit rides on the surface of the stone and a rotary toucher controls the depth of cut for consistent shaping. Turn on the water and the grinder, apply some force parallel with the working surface, you’re on your way to that custom edge. This unit is used for profiling concrete, marble and granite tile and stone.

After you shape the edge, attach the included Hook and Loop backing pad onto the grinder and start polishing with the 50 grit pad. Continue polishing with each grit included with this kit and the factory shine can be achieved.

If you’re not quite sure what size wheel you need? Most commercial 12x12 stone tiles are 3/8" thick.

     By using a 3/16" wheel on a 3/8" thick piece of tile you will take down the upper edge and leave a Radius profile about 1/2 way down the face of the tile. This is a great size for a light rounding of corners in many situations including under mount sink holes in granite slabs.

V30 diamond profile wheel - This wheel will complete a full half circle from the bottom to the top of a 1-1/4" slab. Use the picture large picture as a reference as it is very close to scale.

Note: when using with tile, you can only use a bit that is the same size or smaller than the thickness of the stone IE: most standard over the counter stone tile is 3/8 thick, so only 3/8” and 3/16” bits can be used. Some large 16 x 16 or 18 x 18 tile can be ½ thick, in this case 1/2” 3/8” and 3/16” bits can be used.

Part # Price Qty
v30vpolset $442.55

Home | New Products | Specials | Learning Center | Contact Us | Privacy Policy | My Account | Shopping Cart 747 South Kellogg Ave, Goleta, CA  93117 866-425-4693